查看: 4254|回復: 3


發表於 2010-8-9 00:01:41 | 顯示全部樓層 |閱讀模式

The Process of Solarization

To begin the process, develop and agitate your paper normally. When the image begins to appear, remove the print from the developer and place it into a tray of water for about ten seconds. This will slow the development process.

The next step is to re-expose the paper to light. This exposure should last only about two seconds. The light source should be a low watt bulb, 15 to 20 watt, and should be three to four feet away from the print.

The final step is to put the paper back into the developer for the remaining development time. Complete the process of development using your stop bath, fixer and final wash.

借人 demo..

發表於 2013-8-16 13:31:33 | 顯示全部樓層
thanks for sharing
發表於 2013-8-16 13:48:52 | 顯示全部樓層
thanks for sharing
發表於 2013-8-16 22:49:40 | 顯示全部樓層
thanks for sharing
您需要登錄後才可以回帖 登錄 | 註冊



GMT+8, 2022-8-11 17:10 , Processed in 0.044700 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回復 返回頂部 返回列表