論壇元老
★★★★★★★★★★
查看個人網站
查看詳細資料
TOP
Hi hi
看得愈遠站得愈高
原帖由 alfredmoody 於 2008-11-10 13:56 發表 定係我地太少生意, sam 哥已經唔記得左我地呢..
版主
原帖由 telee 於 2008-11-10 15:00 發表 你上阿 Sam 網站睇睇就知宜家好多o野唔使搞團購..
原帖由 alfredmoody 於 2008-11-10 16:25 發表 越搞越大 其實我係想借個位黎問 markins 架乍
原帖由 telee 於 2008-11-10 16:47 發表 Markins 可以問我.. 因為我用 M20 同 Q3..
原帖由 蘇蘇 於 2008-11-10 16:55 發表 About Markins Q3, is it similar to Acra-Swiss Z1 ???
原帖由 telee 於 2008-11-10 17:04 發表/img][/url] 你比較下就會留意 ...
原帖由 蘇蘇 於 2008-11-10 17:10 發表 Thanks. I already have their specification (Q3, M10 and M20). Do you have any comparison between M20 & Z1?
原帖由 telee 於 2008-11-10 17:13 發表 我無比較過.. 不過老中青就有以下數據.. http://photog.hk/viewthread.php?tid=2107&extra=page%3D1 經已置頂.. 有問題不妨問下佢.. 查 10 無人問佢o野佢好悶的.. ...
原帖由 蘇蘇 於 2008-11-10 17:20 發表 I had checked that post before. He gave a similar answer to me when I met him last time. http://photog.hk/viewthread.php?tid=2107&page=1#pid121647 When will you go to NSW / ...
原帖由 telee 於 2008-11-10 17:22 發表 Show me 5 隻黑仔..
原帖由 蘇蘇 於 2008-11-10 17:28 發表 NSW ... Go Go Go ...
原帖由 alfredmoody 於 2008-11-10 18:23 發表 俾人__ __左我條 thread 添.....
原帖由 telee 於 2008-11-10 18:25 發表 下次由你拍鳥蠅..
原帖由 alfredmoody 於 2008-11-10 18:26 發表 想問下 Q3 同 Q3TR 有咩分別 同埋 有無現貨 乍....
* Patented ergonomic design * Custom designed for Gitzo traveler tripods with smaller panning base and shaftless quickshoe knob. * Custom design allows the Gitzo traveler tripods to fold more compact. * Comes with a custom designed shaftless QR-48. * All-in-one type ballhead with a quick release clamp compatible with dovetail style plates from other major manufacturers such as Arca-Swiss, Kirk, Wimberley. * Ideal ballhead for a small SLR camera with midsize zoom lens. * Light weight, amazing support, smooth operation. * Bi-axial progressive locking mechanism supporting up to 65 lbs of weight (130 lbf·in of torque). * Amazing 78 load/weight ratio (weighs only 0.84 lbs). * Patented fluid style main knob for smooth and easy control. * Simple and intuitive single knob tension control. * Drop notch for vertical photographs. * Panning base with laser engraved index at every 10 degrees. * Tough and beautiful hard-anodized finish. * Fits all standard monopods and tripods with a 3/8" bolt (Tripods with 1/4" bolt require an adapter bushing which is not provided.). * Click here for a QuickTime movie of Q3 Emille * Clamp "Loctited" for safe operation and durability. * Built-in spirit level. * Patented spring loaded detent pin to prevent from costly accidental drops. * Safety stop relief. * Captive knob with smooth silicone rubber sleeve. * Completely enclosed moving mechanism to keep the dust out. * Rounded corners and edges for safety and ergonomics. ... Model Markins Q-Ball Q3 "Emille" Camera Connection Quick Shoe (Quick Release Clamp) Maximum Load 65 lbs (30 kg) Maximum Torque 130 lbf·in (150 kgf·cm) Weight 0.84 lbs (385 g) (Including the clamp) Height 3.58 in (91 mm) (Including the clamp) Housing Diameter 1.89 in (48 mm) Panning Base Diameter 2.20 in (56 mm) (Traveler: 1.97" (50 mm)) Ball Diameter 1.50 in (38 mm) Friction Control Bi-Axial Progressive Panning Yes Panorama Index Yes Tripod Lock Hole 3/8" UNC Color Available in black, blue, and red anodized finishes
原帖由 telee 於 2008-11-10 18:38 發表 為o左方便波頭同腳 1 齊收.. Q3TR 應該再細o的.. http://www.markinsamerica.com/MA5/Q3.php?req=trv 有無貨就要問 PowerEx.. 佢係香港代理..
